13559553569
泉州聯進機械有限公司
QUANZHOU LIANJIN MACHINE CO., LTD
切
膠
使
說
明
Rubber Cutter Cutting/Bale Cutter Usage
用途：切丁苯标膠順丁等膠料。
特點：1.切完之後，自動上升，操作省時人性化。
2.刀片材質特别設計，切料利索。
主要技術參數 | |
型号 Model | LJ-C600 |
機型Systems | 液壓式 |
外型尺寸 | |
工作寬度Working Width(mm) | 6 |
功率Power(KW) | 2.2 |
重量Weight(kg) | 300 |
使用說明：
主電源線：2.5平方毫米 四芯線
3. 液壓油要按時更換（一般一年更換一次）。
4. 油泵壓力不要随意調整，一般60kg可以正常工作。
5. 自動檔按住啓動開關2秒切刀自動下降自動上升。手動檔需長按啓動開關切刀下降，松開自動上升。
主要技術參數 Technical Parameters | |
LJ600 | |
機型Systems | |
0*760*1670 | |
工作寬度Working Width(mm) | 600 |
功率Power(KW) | 2.2 |
重量Weight(kg) | 300 |
Public equipment
Public equipment：Power: 380V,50Hz.
Host power line: 2.5mm² four-core
1. Add the 68# hydraulic oil until oil gauge reach to 80%.The hydraulic oil should be kept clean and no sundries in oil tank or it will break the oil pump and the electromagnetic valve and affect its durance.
2. Watch out when a bale cutter is working. Keep hands off when the knife is cutting.
3. Hydraulic oil should be renewed regularly (normally once per annum).
4. Do not arbitrarily adjust the pressure of the pump, the normal value being 60kg.
5. Automatic stop and press start switch 2 SEC automatic drop automatically increases. The manual gear should be long pressed to start the concern knife drop, loosen the automatic rise.
